HE05IN – Standard ECM – 115V / 1P

$3,825.00

Available on backorder

  • Application Type:Indoor
  • Ventilation Type:Static plate, heat and humidity transfer
  • Typical Airflow Range:120–375 CFM
  • AHRI 1060 Certified Core:One L62-G5
  • OA Filter(s):Total Qty. 1, MERV 10: 10" x 20" x 2"
  • RA Filter(s):Total Qty. 1, MERV 10: 10" x 20" x 2"
  • Dimensions:34 5/8" L x 37 5/8" W x 12 1/8" H
  • Weight:94 lbs.
SKU: HE05-JIN--S11EE---GNT---L Category: Tags: , , , ,

$3,825.00

Description

HE05-JIN–S11EE

This ERV features an airflow capacity up to 375 CFM in a 12.1″ low profile, ceiling mount cabinet. As the newest addition to RenewAire’s commercial HE Series, the HE05 is a self-contained, stand-alone ERV, but can also be ducted into HVAC ventilation systems.  The HE05IN Energy Recovery Ventilator (ERV) is a device for recovering both sensible energy (heat) and latent energy (moisture) from the Exhaust Air from an Occupied Space and injecting those energies into an incoming Outside Air stream. It accomplishes this task by forcing the two airstreams through enthalpic cores, where the energy exchange takes place. The two airstreams pass through the enthalpic cores at right angles and the airstreams never mix together.

Each ERV has two EC (electonically commutated) motorized impellers, one for each airstream. Impellers have EC motors controlled by a printed circuit board, a RenewAire Commercial Controller, or by a building management system (BMS). There are a number of different control devices available to control the operation or speed of the unit fans. For further information on available control accessories, see the product submittals.

These ERVs are commonly installed as part of an air-handling system that provides heating and cooling of Supply Air. They can also be installed to operate as stand-alone devices when ducted directly to and from the Occupied Space.
Each unit has an integral 24VAC power supply that is used internally and can also be used as a power source for other optional control devices. The HE05IN units are low-maintenance, requiring periodic replacement of the air filters and annual vacuuming of the enthalpic cores.

HE05IN – OVERVIEW

  • Application Type:Indoor
  • Ventilation Type:Static plate, heat and humidity transfer
  • Typical Airflow Range:120–375 CFM
  • AHRI 1060 Certified Core:One L62-G5
  • OA Filter(s):Total Qty. 1, MERV 10: 10″ x 20″ x 2″
  • RA Filter(s):Total Qty. 1, MERV 10: 10″ x 20″ x 2″
  • Dimensions:34 5/8″ L x 37 5/8″ W x 12 1/8″ H
  • Weight:94 lbs.

Click here for Renewaire HE05IN Specs

Accessories:

  • Filters: MERV 13, 2″ (shipped loose)
  • Backdraft damper: 10″, 12″
  • Automatic balancing damper: 4″, 5″, 6″
  • Motorized Dampers: 8″
  • Louvered wall vent 8″: taupe vinyl, galvanized, paintable galvanneal
  • Louver with 8″ round duct connection: 12″ W x 8″ H
  • Hooded wall vent 8″: galvanized, paintable galvanneal
  • Potentiometer speed control: remote installed
  • Digital time clock: wall mount (TC7D-W), in exterior enclosure (TC7D-E)
  • Carbon dioxide sensor/control: wall mount (CO2-W), duct mount (CO2-D)
  • IAQ sensor: wall mount (IAQ-W), duct mount (IAQ-D)
  • Motion occupancy sensor/control: ceiling mount (MC-C), wall mount (MC-W)
  • Smoke detector: duct mount (SD-D)
  • BACnet fan control: wall mount (BACNETFC-W)
  • Indoor electric duct heater: RH series (1–11.5 kW),
  • EK series (1–175 kW);
  • Hanging bracket kit
  • Hanging spring vibration isolation kit

Specification

Additional information

Filter

EV SERIES

Reviews (0)

Be the first to review “HE05IN – Standard ECM – 115V / 1P”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Downloads (1)

Main Menu

HE05IN - Standard ECM - 115V / 1P

$3,825.00

Add to Cart